Loading 3D Model
Initialising three.js…
Equipment Inspection
Phase 0 — Rope Grab Device
Rope grab fall arrest device animation
This is the rope grab — the fall arrest device used during the ladder climb. It attaches to the vertical wire rope lifeline and slides freely upward as you climb. If you fall, the internal cam locks instantly, arresting the fall within centimetres.
Anchor → Wire Rope Lifeline → Rope Grab → Energy Absorber → Harness
⚠ Always install with the directional arrow pointing UP. Inspect cam, housing, and rope channel before every use.
Auto-advancing in 10s...
EQUIPMENT INSPECTION
Inspect rope grab device before climbing
Arrest Force
0.0 kN
Fall Velocity
0.00 m/s
Rope Grab Status
SLIDING
Speed
0.0s / 5.0s
Sequence Phases
Physics Data
0.00
metres
Fall Distance
0.00
m/s
Velocity
0.0
kN
Arrest Force
0
%
Shock Deployed
⚠ Warning
Static Line Systems
Static Line (this sim)0.3m fall
Inertia Reel1.2m fall
No Fall ProtectionFull height
Rope grab locks in <0.3sMinimal injury risk
System Specifications
Rope Grab
shuttle type
Device Type
10
mm ø
Wire Rope Dia.
4.0
kN max
Arrest Force
1891.4
AS/NZS
Standard
Simulation based on AS/NZS 1891 Series
Static line with rope grab: continuous connection during ascent/descent
Rope grab locks automatically on sudden downward movement · AS/NZS 1891.4
High Risk Interactive · highriskinteractive.com.au